Hybrid combiner also named as RF splitter hybrid, divider hybrid all refer to the same types of element - power dividers and power splitters being the same name for the same function and a power combiner is the reverse of a splitter.
Huaptec supply a series of low-pim and low insertion loss passive components for indoor mobile signal coverage solutions.
This is a 90 degree hybrid combiner with four ports, two of which are decoupled from each other. The port 4 is connected with load, of the two equal outputs, only one can transmit an effective output as much port 3 as possible. The effective power entering into ports 1 is distributed into ports 3. Port 2 is decoupled and without power whether on ports 3 are not matched. The others ports is also same.
- Wide frequency band from 698MHz to 2700MHz
- High power capacity and isolation
- Low insertion loss and extremely low PIM
- Application for indoor and outdoor using
698 - 2700 MHz
In band fluctuation
<-120dBc @ 2 x 43 dBm CW
Approx. 147 x 81.8 x 40.8 mm
-25°C to +75 °C
-40°C to +85 °C